Original Arduino Nano 33 BLE Sense Rev2 ABX00069
₹3,099.00
- Processor: nRF52840 (datasheet)
- Microcontroller: nRF52840
- Security: ECC608 crypto chip
- Flash: 1MB
- RAM: 256KB
- Circuit voltage 3.3V
- Sensors onboard: digital microphone, 6-axis accelerometer, pressure humidity, temperature, gesture recognition.
Original Arduino Nano 33 IOT ABX00027
₹2,599.00
- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU (Datasheet)
- Radio module: u-blox NINA-W102
- Secure Element: ATECC608A
- IMU: LSM6DS3
- Clock Speed: 48MHz
- Operating Voltage: 3.3V
Original Arduino Nano A000005
₹1,949.00
- Manufacturer: Arduino Officials
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Original Arduino Nano Every ABX00028
₹1,049.00
- Manufacturer: Arduino
-
MCU: ATMega4809
-
Clock Speed: 20MHz
-
Flash: 48KB
-
EEPROM: 256byte
-
SRAM: 6KB
Original Arduino Uno Rev3 A000066
₹1,900.00
- Manufacturer: Arduino Officials
- Micro-controller : ATmega328P.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
Original Arduino Uno Rev3 SMD A000073
₹1,999.00
- 14 digital inputs/outputs, including 6 PWM inputs
- 6 analog inputs
- 1 ICSP connector
- 1 revised and corrected reset circuit
Original Arduino UNO WiFi REV2 ABX00021
₹4,799.00
- Microcontroller: ATMEGA4809
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (6 Provide PWM Output)
- PWM Digital I/O Pins: 6
- Analog Input Pins: 6
- DC Current per I/O Pin: 20mA
- DC Current for 3.3V Pin: 50mA
- Flash Memory: 48KB (ATMEGA4809)
- SRAM: 6,144KB (ATMEGA4809)
- EEPROM: 256 Bytes (ATMEGA4809)
- Clock Speed: 16MHz
Raspberry Pi 3 Model A+
₹2,300.00
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
- Extended 40-pin GPIO header
- Full-size HDMI
- Single USB 2.0 ports
- CSI camera port for connecting a Raspberry Pi Camera Module
- DSI display port for connecting a Raspberry Pi Touch Display
- 4-pole stereo output and composite video port







