₹1,499.00 ( Incl. GST )
BGC v3.15 MOS Large Current 2-axis Brushless Gimbal Controller Driver is the original BaseCam SimpleBGC 8-bit controller board (formerly also called AlexMos). While this board has been superseded by the 32-bit version, this 8-bit version is still available in the marketplace and is actively used and supported.
It still produces outstanding results!!!
Without the extension board, this controller can be used for building high-quality 2-axis camera stabilizing systems. The controller can also be used for 3-axis control systems with the addition of the extension board.
In either case, from a functional perspective, the newer 32-bit board is 100% backward compatible with this board, and users of this board can freely upgrade systems from this board to the newer 32-bit board.
In addition, the management software is backward compatible, so it is possible (or preferred) to use a new version of the GUI (SimpleBGC’s management software) with this board- giving an improved experience with this board and also further making an upgrade to the 32-bit board as easy as possible.
Adjustment
The controller board is configured through our multi-platform software product (SimpleBGC GUI). You may run this on a PC, Mac, or Linux. A version is also available for Android.
Note that the board has firmware and the GUI software runs externally (on a PC, Mac, or Linux, etc) but the GUI keeps track of the firmware number and it requires that the GUI revision be at or newer than the board’s firmware.
While there is a User Manual for the 8-bit version, since you may use the GUI for the 32-bit board with this board (the 8-bit) it may nonetheless be instructive to obtain the newer and more thorough User Manual for the newer 32-bit version. This is especially pertinent if you choose to use the newer version of the GUI with this board. Remember however you can only use firmware for the 8-bit board on the 8-bit board.
Note:
We recommend to don’t flashing/Updating the Default firmware. Updated or new firmware may cause a problem of connectivity with PC/Laptop.
1. Recommended power supply is 12V(3s battery).
2, Camera must be fixed in the head (without any loosening).
3. Adjust the Gopro camera to the left or right,so that the camera is at Horizontal level.
4. Before camera fixed in the gimbal , please do not push ” on ” button to have power.
5.The gimbal camera must be use belt tight, otherwise it will have problems. And if you do this many times, it will cause damage to the flight controller.
1 x BGC v3.15 Two-axis brushless gimbal driver Module
1 x Gyro sensor. (with 30 cm cable)
1x Cable
| Max. Current to each Motor | 2.8 A |
|---|---|
| Short Time Current to each Motor | 7.1 A |
| Output Current Regulation | 8 or 32 kHz PWM |
| Interface Type | I2C |
| Supported Sensors | MPU6050 |
| Overcurrent protection | Yes |
| Overheat Protection | Yes |
| Under Voltage Protection | Yes |
| Reverse Polarity Protection | Yes |
| Dimensions in mm (LxW) | 52 x 52 |
| Cable Length (cm) | 30 |
| Mounting Hole(mm) | M3 |
| Shipping Weight | 0.06 kg |
| Shipping Dimensions | 10 × 7 × 2 cm |
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Elecfy customers from any kind of manufacturing defects. Replacement will be done against manufacturing defects.
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
BGC v3.15 MOS Large Current 2-axis Brushless Gimbal Controller Driver
We provide a wide range of electronic components for all your needs. Whether you are working on artificial intelligence, internet of things, wireless electronics, or drones, we have got you covered. Our products are of the highest quality and offered at the best prices in the market.
© Elecfy 2024. All Rights Reserved | Designed by E Infotech Solutions
Reviews
There are no reviews yet