₹239.00 ( Incl. GST )
If you are wandering to navigate the distance with a drone then this GPS Module is needed for you. GPS drones are equipped with a GPS module that allows them to know their location relative to a network of orbiting satellites. Connecting to signals from these satellites allows the drone to perform functions such as position hold, autonomous flight, return to home, and waypoint navigation.
This is a complete GPS module that is based on the NEO 6M GPS. This unit uses the latest technology to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.
The GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-center software for configuring the GPS and changing the settings and much more. It is really good software (see link below).
NOTE:
NEO-6M GPS Module is not compatible with APM 2.8 Flight Controller
To Explore more GPS modules
Interfacing NEO-6M with Arduino:
For Arduino code Click here
6 GPS Receiver and Protocol Description
Onboard M24C32-R (432RP marking) EEPROM datasheet
Onboard voltage regulator MIC5205 (marked KB33) datasheet
To connect the Neo GPS module with Raspberry Pi Click here
1 x NEO-6M GPS Board.
1 x Detachable Antenna.
| Model | Ublox NEO-6M |
|---|---|
| Receiver Type | 50 Channels, GPS L1 frequency, C/A Code, SBAS: WAAS, EGNOS, MSAS |
| Input Supply Voltage (VDC) | 2.7 ~ 6 |
| Main Chip | NEO-6 |
| Sensitivity (dBm) | -160, 156, Cold Start (without aiding): -147 dBm, Tracking & Navigation: -161 dBm |
| Navigation Update Rate | 5Hz |
| Position Accuracy (Meter) | 2 |
| Operating Temperature (°C) | -24 to 84 |
| Tracking Sensitivity (dBm) | -161 dBm |
| Avg Cold Start Time (s) | 27 |
| Warm Start Time (s) | 27 |
| Maximum Speed | 500 M/s |
| Dimensions (LxWxH) mm | Antenna – 25 x 25 x 7, GPS Board – 22 x 30 x 4 |
| Weight (g): | 12 |
| Cable Length (cm) | 10 |
| Shipping Weight | 0.016 kg |
| Shipping Dimensions | 8 × 6 × 4 cm |
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of elecfy customers from any kind of manufacturing defects. Replacement will be done against manufacturing defects.
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
NEO-6M GPS Module with EPROM
We provide a wide range of electronic components for all your needs. Whether you are working on artificial intelligence, internet of things, wireless electronics, or drones, we have got you covered. Our products are of the highest quality and offered at the best prices in the market.
© Elecfy 2024. All Rights Reserved | Designed by E Infotech Solutions
Reviews
There are no reviews yet