HEX Here3+ CAN GNSS GPS Module with iStand
₹24,300.00 ( Incl. GST )
- Model: Here3+
- Receiver Type: u-blox high precision GNSS modules (M8P-2)
- Processor: STM32H757
- IMU sensor: ICM42688,RM3100
- Communication Protocol: DroneCAN 8Mbit/s
- Operating Temperature: -40℃ to 85℃
- Navigation Update Rate: 8 hz
Product Details
Here3+ GPS is a cost-efficient GNSS system that supports RTK mode with positioning accuracy down to centimeter-level in an ideal environment. See our store for the Here+ Base. Improved dust and water resistance over the original Here+ (not guaranteed to be water-proof). High data rate, upgradeability, noise immunity, and real-time features from the DroneCAN protocol. Here3+ is now moving to DroneCAN 8Mbit bus speed and supports future firmware updates. Here 3 is equipped with the STM32F302 processor while the Here3+ uses the dual core STM32H757 running at 400MHz with 2MByte Flash and 1MByte RAM. Future updates will be available from Mission Planner. Built-in IMU (compass, gyroscope, and accelerometer) for advanced navigation needs.
Features:
- It is made of carbon fiber.
- very light weight .
- vibration less stand .
- Looked very Attractive.
- Satellite Constellation: GPS L1C/A, GLONASS L1OF, BeiDou B1I
Specification
| Model | Here3+ |
|---|---|
| Receiver Type | u-blox high precision GNSS modules (M8P-2) |
| Processor | STM32H757 |
| Communication Protocol | DroneCAN 8Mbit/s |
| Operating Temperature (°C) | -40 to 85 |
| Length (mm): | 68 |
| Width (mm): | 68 |
| Height (mm): | 16 |
| Weight (g): | 51.8 |
| Shipping Weight | 0.185 kg |
| Shipping Dimensions | 12 × 12 × 5 cm |
HEX Here3+ CAN GNSS GPS Module with iStand














Reviews
There are no reviews yet